Meizu MX4 Pro finally goes official : Specs and Official images

After a long long wait and too many rumors and leaks, Chinese handset manufacturer Meizu has officially declared the 5.5” Meizu MX4 Pro. The design of the device is quite similar to the original flagship Meizu MX4 with a slightly redesigned capacitive buttons. The device offers an very good screen-to-body ratio of 76.5% with slimmed down 2.8mm bezels, 9mm thickness and weighs 158 grams. Talking about the screen, the device hosts a 5.5inch JDI display having a resolution of 1536×2560 pixels and is covered with the toughened Gorilla Glass 3 at the top. This extremely high resolution boosts the pixel density to 546ppi and the company claims that the handset can offer a maximum brightness of 450 nits.

The device is powered with the quad-core Samsung Exynos 5430 SoC the recently launched 20nm which arrived along with the Samsung Galaxy Alpha. The chipset comprises of four Cortex A15 cores clocked at 2.0GHz and other four Cortex A7 clocked at 1.5GHz. Additionally for graphics support, the device has the powerful Mali T628 MP6/600MHz GPU graphics. The memory for the device includes a 3GB of LPDDR3 RAM and would be available in three storage options of 16, 32 and 64 GB.

To its back, the Meizu MX4 Pro has a 20.7MP camera with Sony IMX220 Exmor RS camera sensor with a sapphire glass shield. This sensor offers 5 element, 300 degree panoramic lens with an aperture of F/2.2 and a fast 0.3 seconds autofocus, dual-tone flash, 4K video recording and a 100fps burst shooting mode. The front hosts a 5MP camera shooter with 4 element, 84.4 degree wide-angle sensor. The handset runs the company’s own Flyme OS skin topped over the Android 4.4.4 KitKat.

The handset comes with dual-band Wi-Fi of 2.4GHz and 5GHz, LTE band connectivity, NFC, GPS, A-GPS, Glonass and Bluetooth 4.0. The device bakes a powerful 3500mAh of battery life to support all its powerful specs.

The company has introduced mTouch its own work on fingerprint sensor. This new sensor is placed under the sapphire glass covered home button that could register and process user’s fingerprints in just 0.5 seconds. The sensor offers a sensitivity of 508ppi meaning you could get the job done even in your finger is dirty or wet. For its audio enhancements, the company has introduced a new TI OPA1612 amplification chip that comes with an advanced DAC master clock architecture with ceramic film capacitors and high-precision-low-temperature-drift resistors to clip the background noise.

 

During release, the handset would be available in three different color variants of yellow, grey and white. The handset would be priced with a $410 tag.

source: Meizu

Meizu MX4 Pro finally goes official : Specs and Official images

Meizu MX4 Pro specs leak out with whopping 4GB of RAM on-board

Just after Chinese handset manufacturer Meizu officially unveiled its Meizu MX4, the specs for its Pro version have leaked online! Recently the specs sheet for the device has been leaked in Chinese mediathat shows the device to be having some very ultra-high-end and spectacular specs.

The specs sheet shows the Meizu MX4 Pro to be coming with a 5.36inch display with an excellent resolution of 2560×1536 pixels. The back of the handset would likely host a 20.7MP primary camera while its front is tipped to host a 13MP secondary camera. This will be a really big jump for secondary camera after 2MP camera in the latest MX4.

One more major upgrade that the Meizu MX4 Pro would bring is the whopping 4GB RAM on-board. The device would be powered with Samsung’s Exynos 5430 chipset with an octa-core CPU. Out of these eight core, four of them are Cortex A17 clocked at 2.6GHz and the other four are Cortex A15 clocked at 2.1GHz. This might raise to much speculation as the Exynos 5430 chipset uses a Cortex A-7 and Cortex A-15 cores. This might suggest that the A17 might be a misprint. Moreover in Exynos 5430, the Cortex A15 has maximum clocking capacity of 1.8GHz and the Cortex A7 has 1.3GHz. So we would like you take these news with a pinch-of-salt.

Looking to its other specs the device would arrive with three storage options of 16,32 and 64 GB. The connectivity options for the device would include Bluetooth 4.0, 4G LTE and Wi-Fi 802.11. That’s all the news we have right now for the device. Stay tuned as we will keep you updated with things that arrive our way.

Meizu MX4 Pro specs leak out with whopping 4GB of RAM on-board